The only issue is, there is no camera shown. The connection of the whole thing is going though utp or usb to usb. The laser is connected which means problem 1 will begin now.
Now we have RDVision installed, including the good usb/utp software to connect with it. Also if you reset it you can't use the RDVision anymore, if you don't reset it, you can't use lightburn. The problems above can all be solved with a simple reset, but will take around 30 minutes to adjust all the coordinates and test for stability. Resetting the lasers origin will send the laser to the Y/X 0 corner, instead of bringing it back to the laser known origin (this issue is fixed, the origin changed to “No Return” instead of the option “Absolute Origin” that we use.) Temp file is not uploading anymore, and if you start the other files saved in the laser it won’t start not frame.
The issues occur are (only seen from the perspective when you’re behind the controller instead of pc): So, the camera is still not working, and if we want to make some new files, we have to reset the whole configuration settings to have access again to the laser since we don’t know what all the adjustments are that RDV did to the laser. It looks like RDV app does think that the camera is working since the connection doesn’t give any issues and you can make the test page, drag forth and back etc with the camera almost as if it would work.Įvery time when we are trying to use RDVision instead of our regular software Lightburn, it resets some configurations in the lasercutter. Everything in RDVision works for the laser, except the camera. While we tried a lot of things over the past year it’s still not working and it drives us crazy, we tried contacting the seller for more information but that didn’t help us much further. Connected using Ethernet, Camera and laser are using the same IP AddressĬamera shown in Hikrobot Machine Vision Software MVS.Ĭamera is not showing up in RDVision.
0 kommentar(er)
